Tires - E-Lux Sierra Classic Owner's Manual

Occasionally the shifter gear number and sprocket locations may not
match. If this happens then the derailleur needs an adjustment.
Adjustments can and should be done by a qualified bicycle technician.
You can also watch YouTube video and see if you are comfortable doing
it on your own.

Tires

1. Before each ride always inspect your tires for cracks or wear. If
any issues are found always address before riding.
2. Check tire pressure with a quality tire gauge and be sure the
pressure is 20 PSI.
3. If tire will no longer hold air then the tube will need to be
replaced.
4. Lubricate the Chain once a month with a lubricant and check that
all bolts and parts of the bike are tight.
Repairing the Rear Tire
Your E-Lux Electric Bike has a powerful electric motor that is located in
the rear hub of the bicycle. If removal of the rear tire is necessary you
must first disconnect the power cable that runs to the hub. This can be
done by pulling both ends of the cable opposite directions at the
connector. Please see photo below for location. You will need to cut the
ties holding the cable to the frame. When putting the tire back on the
connector has an arrow on each plug that has to be aligned as you plug it
in. If you do not have a bike stand, put the bike on its side on soft carpet
and remove the tire. Do not put the bike upside down as it will damage
the throttle and display on the handle bars.
30|
P a g e