Ialing Acid Number - GE 21008 User Manual

TIP: To prevent the CID information from automatically being deleted, you
may want to store it in the phone's memory.
NOTE: It is important that you format CID records correctly before storing in
internal memory.
1. Make sure the phone is OFF (not in talk mode).
2. Use the cid/vol (up or down arrow) button to scroll to the desired
CID record.
3. Press the MEM key to display SELECT MEMORY 01-50.
4. Use the touch-tone pad to enter a memory location number (for
example, press 01 to store the record in memory location one).
NOTE: If the memory location is occupied, REPLACE MEMO? is displayed,
and you must confirm replacement by pressing the MEM button.
NOTE: Press the EXIT button once to keep the previous setting and return to
the sub-menu.
D CID N
IALING A
While reviewing CID records, you may dial the phone number showing in
the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press cid/vol (up or down arrow) button until the desired CID record
shows in the display.
NOTE: Depending on (a) how the incoming caller's phone number is
formatted when it is received, and (b) whether or not you previously pre-
programmed your local area code into the set up menu, you may need to
adjust the format of the incoming caller's stored phone number before
making the call.
UMBER
29