Advertisement
How to Programme the GSM Smart Switch Mini
Once the unit has a
GREEN
dipswitch 2 to the ON position so only authorised numbers you store can activate the unit. If
dipswitch 2 is left OFF, anyone phoning the unit number can operate the relay.
IMPORTANT - PLEASE READ
next page.
To programme a number to the caller ID (WHL) list you will need to send the text message
code:
#WHL#NUMBER#
To delete the number send the text message code:
#DEL#NUMBER#
Example
#WHL#07123456789#
#DEL#07123456789#
If the code is accepted the unit will reply "WHL number stored" or "WHL number deleted"
Once the numbers have been programmed please set dipswitch 2 to the ON position.
You can only send one text message at a time. Please wait for the unit to respond with the
text acknowledgement "WHL number stored" before you try to add another number to the
Furthermore, please ensure that you have credit on the simcard to receive the text
acknowledgements. It may take some time to receive the text acknowledgement
depending upon how busy the network is at the time.
For a quick reset and to clear all the numbers stored, there is a built in reset function that
can be triggered by sending the text message
#RESET#
The unit will remove all WHL numbers stored.
NOTE
- Please only use this function if completely necessary as it will wipe ALL of your
numbers.
www.gsm-activate.co.uk
light, it is ready to be used. The unit can be set by switching
- If you do not require authorised users, please skip to the
How to use the GSM Smart Switch Mini
Stores your mobile number (maximum 60 users)
Deletes the stored mobile number
IMPORTANT - PLEASE READ
system.
Reset Function
Page 4
- 01273462380 - sales@gsm-activate.co.uk
Advertisement
