Advertisement
Quick Links
Made in China
Keycode 42969266
The illustrations shown in this manual are for reference only. The manufacturer reserves the right to
change any specification or feature without further notice.
IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
CO-SLEEPER
BASSINET
IMPORTANT:
RETAIN FOR FUTURE
REFERENCE
READ CAREFULLY
270720
Advertisement
Related Manuals for anko 42969266
Summary of Contents for anko 42969266
- Page 1 CO-SLEEPER BASSINET IMPORTANT: Made in China RETAIN FOR FUTURE Keycode 42969266 REFERENCE The illustrations shown in this manual are for reference only. The manufacturer reserves the right to change any specification or feature without further notice. READ CAREFULLY IMPORTED FOR KMART STORES IN AUSTRALIA AND NEW ZEALAND.
-
Page 2: Maintenance
Introduction: Maintenance: This product has been designed and developed with safety, comfort and functionality Always check parts regularly for tightness of bolts, nuts and other fasteners - tighten in mind. Please take the time to read this manual carefully before using this product or replace if required. -
Page 3: Safety Precautions
Cleaning: Safety Precautions: WARNINGS: Spot clean the mattress and Co-Sleeper Bassinet using mild soap or upholstery shampoo. IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY. NEVER use bleach. Air dry in shade thoroughly before reuse and avoid direct heat and WARNING! BEFORE USE, REMOVE AND DISPOSE OF ALL PLASTIC BAGS AND sunlight. - Page 4 Safety Precautions: Storage/Transport: • The thickness of the mattress must be such that the vertical height (upper surface of A bag (F) is included for easier carrying, transportation or storage. the mattress until the upper edge of the product’s sides) is at least 200mm. Dismantle the Co-Sleeper Bassinet before inserting into the bag.
- Page 5 To Raise the Side Rail: Safety Precautions: WARNING! The height of the adult mattress should always be more than that of the Step 3. Insert the rail into the two upper anchor points, from top to bottom, until you side support for containment of the Co-Sleeper Bassinet. hear the safety “click”.
- Page 6 Parts: To Raise the Side Rail: Check what you have received: Step 1. Open the horizontal zip and remove the surplus netting along the rail under the zip. You have received 1 box. Please check the contents of the box against the list below. If anything is missing, please contact Customer Service.
- Page 7 Co-Sleeper (Fixed to Bed): Assembly: Step 9. Check the height of the Co-Sleeper Bassinet against the adult mattress and Step 1. Remove the mattress (D) and place the Co-Sleeper Bassinet (A) face down on adjust as required. a table or clean, flat surface. WARNING! The height of the adult mattress should always be more than that of the side support for containment of the Co-Sleeper Bassinet.
- Page 8 Assembly: Co-Sleeper (Fixed to Bed): Step 2b. To fasten the leg correctly in place, press downwards until you hear the Step 7. Pull on the loose end of the belt to ensure it is secure and tight around the safety “click” and repeat the same process with the other legs. adult bed frame.
- Page 9 Co-Sleeper (Fixed to Bed): Assembly: Step 5. Use the “co-sleeper” belts (E) provided to fix the Co-Sleeper Bassinet to the Step 4. Turn the Co-Sleeper Bassinet over and insert the mattress (B). Fasten the 4 adult bed. Attach the buckles underneath the Co-Sleeper Bassinet on both sides. hook and loop flaps around the crosspiece bars, making sure that they are fully secure.
- Page 10 Co-Sleeper (Fixed to Bed): Co-Sleeper (Fixed to Bed): Step 1. Undo the zips to open the drop side. Ensure they are fully open. Step 3. Insert the rail into the two lower anchor points, until you hear the safety “click”. CLICK Step 4.
Need help?
Do you have a question about the 42969266 and is the answer not in the manual?
Questions and answers