FujiFilm FinePix S3100 Owner's Manual page 47

Troubleshooting
Troubleshooting Possible causes
Frame erase does not Some frames may be protected.
erase the frame.
The ERASE ALL
function does not erase
all the frames.
Nothing happens when I i Camera malfunction.
use the Mode dial.
i The batteries have run out.
Screens are not i A language other than English is selected
displayed in English. in the "
menu (➡P.60).
i The camera is not connected to the TV
There is no image on
the TV. correctly.
i "TV" is selected as the TV input.
i The video output setting is incorrect.
i The video output setting is incorrect.
The TV image is black
and white.
i The USB cable (included) is not correctly
When the camera is
connected to a PC, the connected to the PC or camera.
i The PC is not turned on.
photographed image or
playback image appears
on the camera's screen.
The camera no longer The camera has suffered an unforeseen
works correctly. problem.
" ® " is not selected in USB mode in the
Can't print with
PictBridge. "SET-UP" menu.
The camera was
connected to PC when
the USB mode was set
®
to " ".
92
eIf you think the camera is faulty, check the following once more.
Solutions
Unprotect frames using the camera on
which the protection was first applied.
i Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power
adapter and try again.
i Load new or fully charged batteries.
1Press the "MENU/OK" button to display
" setting in the "SET-UP" the menu on the screen.
2Press "d" or "c" to select "
"a" or "b" to select "SET-UP". Press the
"MENU/OK" button to display the SET-UP
screen on the screen.
3Press "d" or "c" to move to option 3 and
then use "a" or "b" to select
4Press "d " or "c " several
times to select "ENGLISH".
5Press the "MENU/OK" button.
i Connect the camera and TV correctly.
i Set the TV input to "VIDEO".
i Change the setting to "NTSC" or "PAL"
(➡P.60).
i Change the setting to "NTSC" or "PAL"
(➡P.60)
i Set up the camera and the USB cable
(included) correctly.
i Turn the PC on.
Briefly remove the batteries or disconnect
the AC power adapter. Then reload the
batteries or reconnect the AC power adapter
and try again. If the message still appears,
contact your FUJIFILM dealer.
Select " ® " in USB mode in the "SET-UP"
menu.
Perform steps 1 to 3 to remove the
camera from PC.
h Windows
1 The "New Hardware Found" wizard (or
"Scanner and Camera" wizard) appears.
If the wizard does not appear, proceed to
step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the PC.
h Macintosh
1 The window for locating the driver
appears. If the window does not appear,
proceed to step 3.
2 Click the [Cancel] button.
3 Disconnect the camera from the
Macintosh.
Specifications
System
Model
Effective pixels
CCD
Number of recorded pixels
Storage media
File format
F " and press
Lens
" "
. Aperture
Focal length
Focal range
Shutter speed
Focus
Sensitivity
Photometry
Exposure control
Exposure compensation
White balance
Viewfinder
LCD monitor
Flash type
Self-Timer
Video output
Input/Output Terminals
Video output socket
(USB) socket
DC Input
Digital camera FinePix S3100 / FinePix S3500
4.0 million pixels
1/2.7 inch square pixel CCD
Number of total pixels: 4.23 million pixels
Still image: 2272 × 1704 pixels/1600 × 1200 pixels/1280 × 960 pixels/
640 × 480 pixels (
4 2 1 `
/ / / )
Movie: 320 × 240 pixels (10 frames per second without sound)
160 × 120 pixels (10 frames per second without sound)
xD-Picture Card (16/32/64/128/256/512 MB)
Still image: JPEG (Exif ver. 2.2)
✽ Design rule for Camera File System compliant DPOF compatible
Movie: AVI format, Motion JPEG
Fujinon 6 × optical zoom lens, F2.8-F3.0
F2.8 to F3.0 (automatically selected)
f=6.0 mm to 36 mm
(Equivalent to 39 mm to 234 mm on a 35 mm camera)
Normal: Approx. 0.8 m (2.6 ft.) to infinity
Macro: Approx. 0.1 m (3.9 in.) to 0.8 m (2.6 ft.)
2 sec. to 1/1500 sec. (combined with mechanical shutter)
TTL contrast-type, Auto focus
Equivalent to ISO 100 (automatically set between ISO 64 – 250 depend on
the shooting mode and subject.)
TTL 64-zones metering
Program AE
–2.1 EV to +1.5 EV in 0.3-step increments (in Manual mode)
Auto ( B ), Scene position ( m )
Manual modes, 7 positions can be selected
0.33 inches 110,000 pixels electronic viewfinder
NTSC Approx. 88% coverage PAL Approx. 86% coverage
1.5 inches, 60,000 pixels amorphous silicon TFT,
NTSC: Approx. 87% coverage, PAL: Approx. 85% coverage
Auto flash using flash control sensor
Effective range:
Wide-angle: Approx. 0.8 m to 3.5 m (2.6 ft. to 11.5 ft.)
(Approx. 0.3 m to 0.8 m (1.0 ft. to 2.6 ft.): Macro)
Telephoto: Approx. 0.8 m to 3.5 m (2.6 ft. to 11.5 ft.)
Flash modes: Auto, Red-Eye Reduction, Forced Flash, Suppressed Flash,
✽
Slow Synchro , Red-Eye Reduction + Slow Synchro
10 sec.
NTSC/PAL selectable
2.5 mm dia. jack
For file transfer to a computer
Socket for specified AC power adapter AC-5VH/AC-5VHS (sold separately)
✽
✽ In Manual mode
93