Save/Load Of Song Data Using The S/Pdif Or Adat Digital Signal - Fostex VF160EX Operation Manual

<Items that can be saved or loaded as song data>
•Memory data:
Data for CLIPBOARD IN/OUT, AUTO RTN START/END, AUTO PUNCH IN/OUT.
Locate data (for Locate No. 00 through 99, only available with save/load using CD-RW/CD-R)
•Time base:
ABS, MTC or BAR/BEAT/CLK
•SETUP mode:
Bar/beat setting, tempo setting, metronome on/off, preroll time, MIDI synchronization output signal setting, MTC offset
time, MTC offset mode, REC protect setting, slave mode on/off, slave type setting
<Items that cannot be saved or loaded as song data>
•On/off settings for Auto play mode and Auto return mode
•Vari pitch on/off and pitch data
•SETUP mode:
DIGITAL IN and DIGITAL OUT settings, bar/beat resolution on/off and device ID
Save/load of song data using the S/P DIF or adat digital signal
The VF160EX song data only can be saved to or loaded from a digital machine that can record 16 bit, 44.1
kHz linear digital data with S/PDIF or adat format (such as DAT and adat machines).
<Notes for saving data using the S/PDIF or adat digital signal>
When saving all data including both real and
Additional track data using the S/PDIF or adat
digital signal, note the following.
Only the data recorded within the time duration
between ABS 0 and REC END of the Real tracks is
saved. Therefore, if the recorded time of Additional
tracks is longer than the Real tracks, only the
Additional track data within the time duration
between ABS 0 and REC END of the Real tracks is
saved.
In the example shown on the right, the Additional
tracks have data from "00m 00s" to "10m 00s",
while the Real tracks have data from "00m 00s" to
"07m 00s".
If you are going to save all tracks, the Additional
track data from "00m 00s" to "07m 00s" will be
saved but the rest will not be saved.
<Notes for DAT and adat machines to be used>
Additional
tracks
Real tracks
Seven minutes
107
Save
DAT or adat
REC END (10m 00s) of
additional track
REC END (07m 00s) of
real track