Unusual performance of the coffee system
Problem
The display remains
dark when the coffee
machine is turned on
using the On/Off but-
ton .
The lighting remains off
after the coffee ma-
chine has been
switched on.
The time of day is being
displayed but
the sensor button
and movement sensor
are failing to respond.
The coffee machine
does not respond to op-
eration via the display.
The coffee machine
turns off suddenly.
Frequently Asked Questions
Possible cause and solution
The On/Off button was not held for long enough.
Tap and hold the On/Off button for at least
3 seconds.
The plug is not properly plugged into the electrical
socket.
Insert the plug into the electrical socket.
The fuse has tripped because the coffee machine,
voltage, or another appliance is defective.
Remove the plug from the socket.
Contact a qualified electrician or Technical
Service.
The lighting has been switched off.
Switch the lighting on (see "Lighting" in the
"Settings" chapter).
The lighting is faulty.
Contact Technical Service.
This is not a fault. The QuickTouch function is
switched off. Select
the sensor button and movement sensor
respond even when the coffee machine is switched
off.
There is a fault.
Tap and hold the On/Off button until the display
switches off and the machine restarts.
The factory-set switch-off time (20 minutes) or the
switch-off time you have programmed has been
reached.
If required, you can select a new switch-off time
(see "Settings – Timer").
The plug is not properly plugged into the electrical
socket.
Insert the plug into the electrical socket.
Display
|
QuickTouch
|
On
so that
93