Subscribe to Our Youtube Channel
Related Manuals for anko 43-096-732
Summary of Contents for anko 43-096-732
- Page 2 All instructions must be followed • SERIOUS INJURY OR DEATH • use the p oduct without its frame This product is designed for babies aged between The thickness of the mattress chosen shall be 0 to 6 months, weighing up to a maximum of 9kgs. such that the internal vertical height (surface of the top of the mattress to the upper edge of the bed sides) is at least 200mm in The Adjustable Height Co-Sleeper must be placed on...
- Page 3 PRECISELY Suffocation Hazard: To reduce the risk of SIDS: Pediatricians recommend healthy sleeping o not use any extra padding material. Use only the provided by manufacturer. To avoid serious harm, ensure there are not a sheet with the If gap exceeds 13mm, DO NOT use product. Do not fill the gap with FAILURE TO FOLLOW COULD CAUSE pillows, blankets or other items that can cause suffocation.
-
Page 4: Fall Hazard
NEVER USE THIS PRODUCT IN CO- CORRECT BED AS INCORRECT BED AS MATTRESS, BOX SPRINGS SLEEPER MODE WITHOUT THE FRAME IN LINE & FRAME NOT IN LINE FIXING BELTS SECURELY ATTACHED TO THE ADULT BED FALL HAZARD: MATTRESS, BOX SPRINGS FRAME To prevent falls, do not use this product when the infant begins to EXTENDED... - Page 5 COMPONENTS Please check the contents listed below are included in the box when opened. If there are any missing parts, please contact Kmart Service before using the product. A. Central supporting structure B. Middle support frame C. Fixing belts D. Mattress with removable fitted sheet E.
- Page 6 ASSEMBLING THE BASSINET insert the middle support frame gently into the side slots as per image with curved bar facing down as shown below. 4.You will hear lick sound once the frame into position. sure both sides are securely locked into place.
- Page 7 8. Lift side panel fabric over the side bar. Insert side bar into fabric 5. Turn the product in the position, insert the bassinet fixing steel bar into the tub slot on both sides of pocket. Secure fabric to support frame with grip frame.
- Page 8 TO ADJUST THE HEIGHT 1.The Adjustable Height Co- leeper can be adjusted to 5 different height positions. In order to adjust the height, press the height THIS METHOD IS ONLY COMPATIBLE WITH BED TYPES adjuster buttons (A1) simultaneously on both sides of the cot to the desired position.
- Page 9 IN THE CO- SLEEPER MODE, THE 2 LEGS OF THE BEDSIDE SLEEPER ALWAYS BE ADJUSTED TO THE SAME HEIGHT ENSURE THAT THE FIXING BELTS ARE STRAIGHT.
- Page 10 THE ATTACHMENT SYSTEM MUST ALWAYS BE USED IN CO-SLEEPER MODE NEVER USE THIS CO-SLEEPER MODE WITHOUT THE FIXING BELTS SECURELY ATTACHED TO THE ADULT BED MATTRESSES WITH STRAIGHT SIDES. DO NOT USE PRODUCT WITH A ROUND MATTRESS OR A WATER BED MUS ALWAYS BE FITTED TO THE LONG SIDE OF THE BED.
-
Page 11: Maintenance Advice
MAINTENANCE ADVICE • • 1. Remove the mattress and release the grip fasteners from only. heck the condition of the product for any the middle support frame on the underside of the bedside possible damage. In case of damage, do not use it and keep it sleeper.
Need help?
Do you have a question about the 43-096-732 and is the answer not in the manual?
Questions and answers