Troubleshooting - Electrolux TE1120P User Manual

36 www.electrolux.com

11. TROUBLESHOOTING

Problem
The tumble dry-
er does not op-
erate.
Unsatisfactory
drying result.
The loading
door does not
closed
Err (Error) on
the display.
Possible cause
1)
The tumble dryer is not connec-
ted to mains supply.
The loading door is opened.
The ON/OFF button was not
pushed.
The Start/Pause button
was not pushed.
The appliance is in the standby
mode.
The filter is missed or in wrong
position.
The E59 error code on the display
- dryer overloaded.
Incorrect programme selection.
The filter is clogged.
Too high volume of the load.
The airflow grill is clogged.
Dirt on the humidity sensor in the
drum.
Incorrect remaining laundry mois-
ture degree.
The condenser is clogged.
The filter not locked in the posi-
tion.
The laundry is locked between
the door and the seal.
You try to change the programme
or the option after the start of the
cycle.
The option you try to activate is
not applicable with the selected
programme.
Remedy
Connect in at mains socket.
Check fuse in fuse box (domestic
installation).
Close the loading door.
Push the ON/OFF button.
Push the Start/Pause but-
ton.
Push the ON/OFF button.
Insert the filter in the right posi-
tion.
Unload part of the laundry. Obey
the maximum load.
Do the selection of the applicable
2)
programme.
3)
Clean the filter.
Obey the maximum load volume.
Clean the airflow grill in the bot-
tom of the appliance.
Clean the front surface of the
drum.
Adjust remaining laundry moisture
4)
degree.
Clean the condenser.
Put the filter in the correct posi-
tion.
Put the load correctly in the drum.
Turn the tumble dryer off and on.
Make the new selection.
Turn the tumble dryer off and on.
Make the new selection.
3)