Summary V : 11/19 Identifying parts Introduction Hardware included in box Avoid accidents Weight Capacity Before Starting Furniture assembly Cleaning Dimensions and tools Introduction Read this manual and follow the steps in order to keep the guarantee and also for the perfect fit.
Before starting Prepare the room before starting the assembly, leaving it completely clean and the area in good condition to start the work. Cover the assembly area with a blanket or Use the cardboard of the packaging to carpet to avoid damaging the parts during separate and support the parts removed from the boxes.
Identifying parts PART DESCRIPTION BASE LEFT SIDE RIGHT SIDE SHELF LONGER PARTITION LONGER DOOR LOWER DOOR LOWER PARTITION BACK WITH HOLE LONGER BACK LOWER BACK FEET...
Page 6
Dimensiones and t ools 585 mm 23.03 in You may need help to assembly easier. To improve assembly, use an eletronic screwdriver.
Hardware included in bo x STICKER x 16 EF 000106 x 26 EF 000381 x 6 EF 000132 x 8 HANDLE x 3 EF 000216 X 12 EF 000094 X 12 EF 000043 X 4 PLÁSTIC SUPPORT x 1 LIFT SUPPORT KIT x 2 EF 000033 x 20 CHALK x 01 EF 000025 X 4...
Weight Capacity 19KG - 41.88LB 12KG - 26.45LB 5KG - 11.02LB STEP 1 Fix hardware EF 000094 in pieces 02, 04, and 06. EF 000094 PLASTIC SUPPORT Insert the plastic support into piece 06.
Page 9
STEP 2 Attach hardware EF 000025 at pieces 01 and 03 using hardware EF 000106. EF 000025 STEP 3 Attach hardware EF 000043 on piece 07 using hardware EF 000106. Attach the handle using hardware EF 000381. EF 000381 EF 000043 Handle STEP 4 Insert hardware EF 000033 into pieces 03, 05 and 09.
Page 10
STEP 5 Fix pieces 13 to piece 01 using hardware EF 000745 and EF 000741. STEP 6 Connect pieces 05 and 09, insert hardware EF 000216 and turn to tighten. STEP 7 Connect the part assembled in the previous step and pieces 04 and 06 insert hardware EF 000216 and turn to tighten.
Page 11
STEP 8 Fit pieces 10 and 11 in the specific spaces in pieces 04 and 06. STEP 9 Fit pieces 03 and 12, attach piece 01 to the part assembled in the previous step usingt hardware EF 000132. EF 000025 Please, note hardware EF 000025 position.
Page 12
STEP 11 Attach pieces 07 and 08 to assembled furniture. STEP 12 Attach the parts 1 and 2 using hardware EF 000106, according the image, then fit the part 3. STEP 13 Use stickers to cover apparent screws. Use the chalk to give the final finish on the product. Chalk Sticker...
Need help?
Do you have a question about the HOMMY 05-W and is the answer not in the manual?
Questions and answers