SORINEX P3 Poor Man Glute Ham Developer Assembly Instructions

ASSEMBLY INSTRUCTIONS
P3 Poor Man Glute Ham
Developer
ASSEMBLY INSTRUCTIONS

Tools needed:

1/2" wrench
3/4" wrench
3/16" allen wrench
1.
Align Foot Connector with Right Side Bracket. As Shown.
ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SORINEX INC. IS PROHIBITED.
SORINEX.COM
1 of 3 |
Sorinex Exercise Equipment | 193 Litton Drive | Lexington, SC 29073 | 1-877-SORINEX | info@sorinex.com
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SORINEX INC.
DISCLAIMER:
RESISTANCE TRAINING, GYMNASTICS TRAINING, AND ACTIVITIES AT
HEIGHT ARE POTENTIALLY DANGEROUS AND MAY LEAD TO SEVERE INJURY
OR EVEN DEATH. THIS EQUIPMENT MUST BE USED BY COMPETENT AND
RESPONSIBLE PERSONS OR UNDER THE GUIDANCE AND SUPERVISION OF
COMPETENT PERSONS. BE SURE YOU ARE VERSED IN PROPER
TECHNIQUE AND METHODS BEFORE USING ANY EQUIPMENT. THE
USER ASSUMES ALL RISKS AND RESPONSIBILITIES FOR ALL DAMAGE,
INJURY OR DEATH WHICH MAY OCCUR DURING INCORRECT USE OF THIS
EQUIPMENT. SORINEX BEARS NO LIABILITY ABOVE REPLACEMENT VALUE
OF THE EQUIPMENT IN QUESTION.
Item Number
2.
Secure hardware with 3/4" wrench.