Electrolux 134709300 Installation Instructions Manual page 24

24
Reversing Door
L) Reversing Trim Ring
1 Trim ring orientation is marked on the back.
2 Remove trim ring cover plate. To remove
plate from left, pivot point is down. To
remove plate from right, pivot point is up.
3 Rotate and move trim ring cover plate to
opposite opening in trim and reinsert.
M) Reinstalling Trim Ring
1 Close door.
2 Orient trim so 12 position is approximately
¾" to the left of top center. Opening in ring
should be on the hinge side.
3 Insert trim ring in slots and rotate clockwise
UP
approximately ¾".
N) Reinstalling Trim Plug
1 Open door to 90 degree angle.
2 Install trim plug with 1 long, course-thread,
panhead screw.
O) Plug in dryer and continue operation.