DST-HD1100E
1.2 Rear Panel Jacks
①
④ ⑤ ⑥ ⑦ ⑧⑨ ⑩
①
VIDEO OUT
If your TV or monitor has Audio/Video capability, connect this jack to the AV Input jack on your TV or
monitor using an Audio/Video cable.
②
Left/Right ANALOG-AUDIO OUTPUTS(with Digital Video Output)
Connect these terminals to the analog audio inputs of a TV set (i.e., to a TV that has jacks for L/R inputs).
Or, connect these terminals to the L/R inputs of a separate audio component. Recommended to use these
terminals when you use YPbPr or RGB for video.
③
RF INPUT (75 Ohm)
Connect the antenna here
④
DTV Output Selector(Monitor/Y, P
Connect to the Y-P
-P
/RGB digital video input of a digital-compatible TV set (or the Y-P
B
R
some other video component).
⑤
Display Format Selector
Switches between 1080i (interlaced scanning), 720p (progressive scanning), 480p (progressive scanning),
and 480i (interlaced scanning) formats. (For HDTV broadcasts, 1080i is usually the best setting.)
⑥
S-VIDEO OUTPUT
If your TV or monitor has S-Video capability, use this jack along with the Audio/Video jacks to connect the
HDTV Digital Receiver to your receiver.
②
⑪
⑫
P
)
B,
R
HDTV DIGITAL RECEIVER
③
-P
B
⑬
/RBG inputs of
R
5