Sugary or starchy food residue,
plastics or aluminium foil
NOTICE
Sugary or starchy food residue as well
as plastics or aluminium foil residue can
cause permanent and irreparable dam-
age to the hob.
• If this happens, remove the dirt from the
still-hot glass ceramic with a sharp, com-
mercially available blade scraper. While
doing so, protect hands from burns with
oven gloves or pot holders.
• Once the appliance has cooled down,
you can remove stubborn dirt by using a
specially made, commercially available
detergent.
• Treat the appliance with a special care
product after cleaning.
Something has boiled over on the
sensors
1. Switch off the appliance.
2. Wipe up the material that has boiled over
using a soft rag.
3. Wipe the sensor surface with a slightly
damp cloth.
4. Wipe the sensor surface completely dry
with a paper towel.
5. Switch the appliance back on.
If the sensors are dirty, e.g. because
something has boiled over, the ap-
pliance may turn itself off. You will hear a
signal tone. If the sensors are dirty or damp,
they may not work.
Cleaning the induction hob
Page EN-21