Motor Direction Control; Line Start Lockout - Delta Electronics AC Motor Drive VFD-EL User Manual

100%
90%
80%
70%
60%
50%
40%
2kHz
4kHz
02.04

Motor Direction Control

Settings
This parameter is used to disable one direction of rotation of the AC motor drive direction of
rotation.
02.05

Line Start Lockout

Settings
This parameter determines the response of the drive upon power on and operation command
source is changed.
Pr.02.05 Start lockout (Run when power is ON)
0 Disable (AC motor drive will run)
1 Enable (AC motor drive doesn't run)
2 Disable (AC motor drive will run)
3 Enable (AC motor drive doesn't run)
Revision August 2008, 2ELE, V1.02
25 with mounting method B
℃
50 with mounting method A
℃
40 with mounting method B
℃
Carrier
6kHz 10kHz Frequency
8kHz 12kHz
For 460V Series
0 Forward/Reverse operation enabled
1 Reverse operation disabled
2 Forward operation disabled
0 Disable. Operation status is not changed even if operation
command source Pr.02.01 is changed.
1 Enable. Operation status is not changed even if operation command
source Pr.02.01 is changed.
2 Disable. Operation status will change if operation command source
Pr.02.01 is changed.
3 Enable. Operation status will change if operation command source
Pr.02.01 is changed.
Chapter 4 Parameters|
100%
90%
80%
70%
60%
50%
40%
2kHz 6kHz 10kHz
4kHz 8kHz
For 115V/230V Series
Operation status when operation
command source is changed
Keep previous status
Keep previous status
Change according to the new
operation command source
Change according to the new
operation command source
35 with mounting method A
℃
25 with mounting method B
℃
50 with mounting method A
℃
40 with mounting method B
℃
Carrier
Frequency
12kHz
Factory Setting: 0
Factory Setting: 1
4-41