Chapter 4 Parameters|
Parameter
Explanation
Third Most Recent
06.10
Fault Record
06.11
Fourth Most Recent
Fault Record
Fifth Most Recent
06.12
Fault Record
Group 7 Motor Parameters
Parameter
Explanation
07.00
Motor Rated Current 30 %FLA to 120% FLA
Motor No-Load
07.01
Current
4-14
Settings
14: Phase-Loss (PHL)
15: Reserved
16: Auto Acel/Decel failure (CFA)
17: SW/Password protection (codE)
18: Power Board CPU WRITE failure (cF1.0)
19: Power Board CPU READ failure (cF2.0)
20: CC, OC Hardware protection failure
(HPF1)
21: OV Hardware protection failure (HPF2)
22: GFF Hardware protection failure (HPF3)
23: OC Hardware protection failure (HPF4)
24: U-phase error (cF3.0)
25: V-phase error (cF3.1)
26: W-phase error (cF3.2)
27: DCBUS error (cF3.3)
28: IGBT Overheat (cF3.4)
29: Reserved
30: Reserved
31: Reserved
32: ACI signal error (AErr)
33: Reserved
34: Motor PTC overheat protection (PtC1)
35-40: Reserved
Settings
0%FLA to 99% FLA
Factory
Setting
Factory
Setting
FLA
0.4*FLA
Revision August 2008, 2ELE, V1.02
Customer
Customer