Picture (In Video Mode) - Dell 4210X User Manual

PICTURE (in Video Mode)

Using the Picture menu, you can adjust the display settings of your projectors. The
Picture menu, provides the following options:
V —Allows you to optimize the display image: Presentation, Bright,
IDEO MODE
Movie, sRGB (provides more accurate color representation), and Custom (set
your preferred settings).If you adjust the settings for Brightness, Contrast,
Saturation, Sharpness, Tint, and Advanced, the projector automatically switches
to Custom.
NOTE:
If you adjust the settings for Brightness, Contrast, Saturation,
Sharpness, Tint, and Advanced, the projector automatically switches to
Custom.
B —Use
RIGHTNESS
C —Use
ONTRAST
S —Allows you to adjust the video source from black and white to fully
ATURATION
saturated color. Press
increase the amount of color in the image.
S —Press
HARPNESS
sharpness.
T —Press
to increase the amount of green in the image and
INT
the amount of red in the image (available for NTSC only).
A —Press
DVANCED
ADVANCED" below.
NOTE:
Saturation, Sharpness, and Tint are only available when input source is
from Composite or S-Video.
to
and adjust the brightness of the image.
and to adjust the display contrast.
to decrease the amount of color in the image and
to decrease the sharpness and
to activate Picture Advance Menu. See "PICTURE
increase the
to
to increase
Using Your Projector
to
35