Galileo G30 User Manual page 9

LOADING AND UNLOADING OF VAT
Before any loading, unloading or displacement of the vat, it is imperative to read, understand and follow the
indications included in the packaging.
Please read these instructions carefully before using the vat and keep them in a safe place in order to be able to
consult them when required.
G30 / G30 MODELS
T
Technically suitable and necessary equipment must be used as per the following drawings:
Forklift Minimal capacity: 3.5 t.
Minimal Fork length 1.60 m (63").
Insert the forks straight and always below the labels with the
arrows, check the rear support while insertion.
Leave a minimum spacing of 5cm (2") between the tank and
the forklift's backrest or mast.
GALILEO SAS - Avenue de Gimeux, CS 10225, 16111 COGNAC Cedex - Tel : 05.45.82.62.22
Do not use forklifts with a capacity of less than 3.5 t.
Do not use forks shorter than 1.60m (63").
Do not insert the forks inclined or twist the steering
wheel, as there is a risk of hitting the rear support.
Do not hit or press on the packaging with the forklift's
backrest or mast, use protection foam pieces to avoid
hitting or scraping the tank.
9/22