Table of Contents
Advertisement
3.6 Se tup submenu: Security
Change User/Administrator Password
Y ou can set an Administrator Password or User Password. An Administrator Password
must be set before you can set a User Password. The password will be required during
boot up, or when the user enters the Setup utility. A User Password does not provide
access to many of the features in the Setup utility.
Select the password you wish to set, and press Enter. In the dialog box, enter your
password (must be between 3 and 20 letters or numbers). Press Enter and retype your
password to confirm. Press Enter again to set the password.
Re moving the Password
Select the password you want to remove and enter the current password. At the next
dialog box press Enter to disable password protection.
Chapter 3 – AMI BIOS Setup
56
Advertisement
Table of Contents
