English - Huawei SuperCharge P0006 Quick Start Manual

Car charger max 66w se
Table of Contents

Advertisement

Product Image
Product model
Rated input voltage
USB 1 output (orange)
USB 2 output (black)
Cover material
Working temperature
Instructions
 To ensure product safety, the car charger is equipped with an
intelligent detection chip and must be connected to a Huawei
original cable (able to withstand 6 A or higher current) and a
device that supports the 11 V 6 A protocol, to achieve super fast
charging (11 V, 6 A maximum).
 The female socket of the cigarette lighter or power port may vary
with the vehicle model and may not match the car charger. The
recommended inner diameter of the female socket or power port
is 20.7 mm to 21.5 mm.
 For ITE/AV use only.
Safety Information
 Avoid allowing the product to take heavy knocks during use.
 Do not disassemble or take apart the product.
 Avoid allowing the product to be left in direct sunlight.
 Please only use the device within its approved operating range of
-10°C to +40°C, and only allow it to be exposed to temperatures
within its approved storage range of -40°C to +70°C. Extreme
heat or cold may damage the device.
 The device is not a toy. Children should only use the device when
supervised by an adult.
 Avoid submerging or leaving the product in moist environments.
 Do not use chemicals, powders, or strong detergents to clean the
product.
P0006
12 V DC to 24 V DC
5 V/3 A,10 V/4 A, 11 V/6 A (Max)
5 V/2 A
Aluminum alloy body and heat and
fire resistant PC for the USB cover
-10°C to +40°C
1

English

USB 1 (orange)
USB 2 (black)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SuperCharge P0006 and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

P0006

Table of Contents