Thermaltake Pacific Core P5 DP-D5 Plus Quick Start Manual

This product is intended for installation only by expert users. Please consult with a qualified technician for installation.
Improper installation may result in damage to your equipment.
1. Please carefully read the manual before beginning the installation process !
2. It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000.
3. DO NOT USE any kind of alcohol or alcohol derivatives with this reservoir or the acrylic tube may crack and fail ! Do not clean it using alcohol either
A
Distro Plate
C x 8
Washer
1
To install the DP-D5 in your chassis,
placing a screw and washer that comes
with the DP-D5 on every screw hole that
matches the circles in below picture.
Pacific Core P5 DP-D5 Plus
B x 1
LED Y-Cable
x 1
E x 3
D x 8
Screw G1/4 Stop Plug

Installation Guide

2
2
1
1
4
4

Parts List

F x 1 G x 1
Wrench Controller
J x 1
Bridge Cable
1 3
2
Circle 1 is designed for liquid outlet,
you may choose one of the ports to use.
Circle 2 is designed for liquid inlet,
you may choose one of the ports to use.
Circle 3 is designed for liquid fill,
you may choose one of the ports to use.
Circle 4 is the drain port.
5
B
To avoid air bubble
during liquid cooling
system working, please
fill the reservoir with
coolant to the line
(Normal coolant level)
H x 1
Power Cable
K x 1 L
MB SYNC Cable Velcro
3
Assembly example can refer to
the following figure.
Connect the LED Y-Cable onto
the Distro Plate.
Patented
16.8
Million Color
I x 1
Controller Cable
x 1
A