Using Layer And Split Together; Using Touch Response - Casio WK-1600 User Manual

WK-1800 WK-1600/1630
TUNE/MIDI
TUNE
TOUCH
RESPONSE
NOTE
Split is produced by using Mixer internal mode CH 1 (UPPER1) and CH 3
(LOWER1) at the same time. This means you can use the Mixer to change
the volume balance and stereo pan position parameters for both the main
tone and split tone. See "Mixer Function" on page E-28 for details.
To change the location of the split point
While holding down the SPLIT button, press the keyboard key where
you want the lowest note (the leftmost key) of the upper range (right
side range) to be.

Using Layer and Split Together

You can use layer and split together to created a layered split key-
board. When you use layer and split in combination, the high range
of the keyboard is assigned two tones (main tone + layered tone),
and the low range two tones (split tone + layered split tone).
Split point
Split tone +
Layered split tone
(LOWER1 + LOWER2)
To layer-split the keyboard
1.
Select the main tone, layered tone, split tone, and lay-
ered split tone.
• Use the Mixer to select the tones, following the procedure
under "Changing the Parameters of a Channel" on page E-
30. The main tone is UPPER1, the layered tone is UPPER2,
the split tone is LOWER1, and the layered split tone is LOW-
ER2.
2.
Turn on both layer and split to layer split the keyboard.
• Press LAYER once to turn on layer.
• Press SPLIT once to turn on split.
• The LAYER and SPLIT indicators should be on the display
to indicate that they are turned on.
• The layered split tone name and number appear on the dis-
play for about five seconds. During this time you can use
the number keys to input a tone number to change the lay-
ered split tone if you want. After about five seconds, the dis-
play changes to the main tone name and number.
3.
Now try playing something on the keyboard.
4.
Press LAYER once and SPLIT once to unlayer split the
keyboard and return it to normal.
E-18
WK-1800/1600(E)-16~20
FULL RANGE
CHORD
MAX
FINGERED
CASIO CHORD
MIN
EXTERNAL CH 1 CH 2
SONG PATTERN
INTERNAL UPPER1 UPPER2
BANK
Main tone + Layered tone
(UPPER1 + UPPER2)
Page 18
SPLIT
LAYER
CH 3 CH 4 CH 5 CH 6 CH 7 CH 8 CH 9 CH 10 CH 11 CH 12 CH 13 CH 14 CH 15 CH 16 PARAMETER RESET:
MAIN MANU/
CHANNEL VOLUME:
LOWER1 LOWER2 ACC VOL. CHORD1 CHORD2 CHORD3 BASS RHYTHM TR1 TR2 TR3 TR4 TR5 TR6
SUB MANU/
CHANNEL SELECT:
STORE
TRANSPOSE
NOTES
• Layer-split is produced by using Mixer internal mode CH 1 (UPPER1),
CH 2 (UPPER2), CH 3 (LOWER1), and CH 4 (LOWER2) at the same
time. This means you can use the Mixer to change the volume balance
and stereo pan position parameters for each of the tones. See "Mixer
Function" on page E-28 for details.
• You can use the Mixer to turn off individual channels (layer split tones).
This means you could turn off CH 4 (LOWER2), for example, to sound a
single tone in the lower range and two layered tones in the upper range.
See "Turning Channels On and Off" on page E-29 for details.

Using Touch Response

Turning on touch response causes the volume and sound quality of
keyboard output to change in accordance with the amount of pres-
sure applied to the keyboard.
To turn touch response on and off
Press the TOUCH RESPONSE button to toggle touch re-
sponse on and off.
• Turning on touch response causes the TOUCH RESPONSE indica-
tor to appear on the display.
To set the touch response sensitivity
1.
Press TOUCH RESPONSE to turn on touch response.
• The TOUCH RESPONSE indicator appears on the display.
2.
Within five seconds after pressing TOUCH RESPONSE,
use [+] and [–] or number keys [0] to [3] to select the
sensitivity setting you want to use.
• "ExLight" outputs powerful sound even with light key pres-
sure, while "Heavy" requires very heavy key pressure to out-
put powerful sound.
• Pressing [+] and [–] at the same time returns sensitivity to
the "Normal" setting.
• In addition to pressing the TOUCH RESPONSE button, you
can also turn off touch response by selecting "Touch Off" as
the sensitivity setting.
NOTES
• Touch response operations affect the keyboard's internal sound source
as well as MIDI OUT data.
• Touch response settings do not affect Song Sequencer playback, ac-
companiment, or MIDI note data received from an external source.
• Touch response affects different tones in different ways.
03.7.31, 5:20 PM
Number keys
AMP ENVELOPE
DECAY
7 8 9
SUSTAIN
4 5 6
PITCH ENVELOPE
00 FLAT
1 2 3
01-17 VIBRATO
/NO /YESS
[+]/[
0 18-45 OTHERS –]
DELETE
733A-E-020A
Adobe PageMaker 6.5J/PPC