Recalling A Nav Channel - Garmin SL30 Pilot's Manual

Advanced Operation
Nav Mode
20

Recalling a Nav channel

There are several lists of channels that you can recall from memory in Nav mode. Remote
Localizer, remote VORs, the ten most recently used channels in Nav mode, and the user-
stored channels.
1. In Nav mode, press SEL.
2. Turn the LARGE knob to the desired list.
3. Turn the SMALL knob to view the available channels in each list.
4. Press ENT to select the entry as the standby channel. Press the FLIP/FLOP button to select this entry as
the active channel.
NAV Stored Frequencies and DST Data*
Press
Remote ILS
Remote VOR
Frequencies Frequencies
First First
Last Last
Press to insert into Standby. Press
. Turn LARGE Knob , then turn SMALL knob
Auto Stored
List
(AUTO)
First
Last
to insert into Active.
.
Distance
User
Speed
Memory
Time
(USER)
Data
* Shown when
First
installed
external device
is sending data
Last