Oven Lamp - AEG BS7304001 User Manual

Cleaning the Water Drawer and the Steam Generator:
Fill the water and vinegar mixture (approximately 250 ml) through the water drawer
1.
in the steam generator.
Wait for approximately 10 minutes.
2. Remove the water and vinegar with the Sponge.
3. Use clean water (100-200 ml) to flush the steam generation system through the water
drawer.
4. Remove water from the steam generator with the Sponge and rub dry.
5. Keep the door open to let the appliance dry fully.

Oven lamp

WARNING!
There is a risk of electrical shock.
The oven lamp and the lamp glass cover can be hot.
Before you change the oven lamp:
• Deactivate the appliance.
• Remove the fuses from the fuse box or deactivate the circuit breaker.
CAUTION!
Put a cloth on the bottom of the interior of the appliance. It prevents damage to the lamp
glass cover and the cavity.
Replacing the lamp:
1. You can find the lamp glass cover at the cavity ceiling.
Turn the lamp glass cover counterclockwise to remove it.
2. Remove the metal ring and clean the glass cover.
3. If necessary, replace the lamp with applicable 300°C heat-resistant lamp.
Use the same lamp type.
4. Fit the metal ring to the glass cover.
5. Install the glass cover.
Replacing the oven lamp:
1. You can find the lamp glass cover at the left side of the cavity.
Remove the left shelf support.
2. Use a torx 20 screwdriver to remove the cover.
3. Remove and clean the metal frame and the seal.
4. Replace the oven lamp with applicable 300°C heat-resistant oven lamp.
Use the same oven lamp type.
5. Install metal frame and seal. Tighten screws.
6. Install the left shelf support.
Care and cleaning
25