Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Troubleshooting
Subscribe to Our Youtube Channel
Related Manuals for Barco AMM215WTTP
Summary of Contents for Barco AMM215WTTP
- Page 1 AMM215WTTP LCD Color Display User Guide ENABLING BRIGHT OUTCOMES...
- Page 2 Barco, Inc. 3059 Premiere Parkway, Suite 400, Duluth, GA 30097, USA www.barco.com/en/support www.barco.com Registered office: Barco NV President Kennedypark 35, 8500 Kortrijk, Belgium www.barco.com/en/support www.barco.com...
-
Page 3: Table Of Contents
Recommendations for daily operation ..........................14 How to Use the OSD Menus..............................14 4 Advanced Operation...................................15 On-Screen Display Menus.................................16 Advanced......................................16 Touch Screen Driver Installation ............................17 AMM215WTTP Driver Installation Instructions ......................17 5 Cleaning your display ..................................19 Cleaning instructions..................................20 6 Troubleshooting ......................................21 Troubleshooting list..................................22 Warning Signal ....................................22 7 Important Information ..................................23... - Page 4 R5911667 /03 AMM215WTTP...
-
Page 5: Welcome
Welcome! Introduction Thank you for choosing this AMM215WTTP! For future reference, record the serial number of your display below. The serial number is located on the back of the display. Serial number Warnings, cautions, notes and tips There are four levels of precautionary or advisory statements that may be used in this user guide. In descending order of importance, they are: WARNING: Describes hazards or dangers that might result in personal injury or death. -
Page 6: What's In The Box
Welcome! 1.1 What’s in the box Overview Make sure the following items are present when you unpack the box: • AMM215WTTP LCD display • Power cord • VGA signal cable • USB cable (A to B) • DVI-D cable •... - Page 7 8 mm. Please use four M4 screws diameter with proper length to mount your monitor. The mounting stand must be able to support at least 17.6 lb, or 8 kg. 100.0 mm Slots(X6) VESA Mounting Interface Image 1–3 R5911667 /03 AMM215WTTP...
- Page 8 Welcome! R5911667 /03 AMM215WTTP...
-
Page 9: Installation
CAUTION: When the display is assembled in the medical system, take care of the fixation of all cables, to avoid unwanted detachment. CAUTION: The equipment is not intended to be sterilized. R5911667 /03 AMM215WTTP... -
Page 10: Workspace
4. Connect the cables to the appropriate connectors as seen in the step 3 diagram. 5. Re-attach the cable cover. Take the screw (CBM M3x6) out of the accessory box, and insert the screw into the cable cover and monitor as seen in the step 4 diagram. R5911667 /03 AMM215WTTP... - Page 11 Installation Image 2–1 R5911667 /03 AMM215WTTP...
-
Page 12: Connecting The Display
To ensure the LCD display works well with your computer, please configure the display mode of your graphics card to make it less than or equal to 1920 x 1080 resolution and make sure the timing of the display mode is compatible with the LCD display. R5911667 /03 AMM215WTTP... -
Page 13: Daily Operation
Daily Operation R5911667 /03 AMM215WTTP... -
Page 14: Recommendations For Daily Operation
When the OSD Lock function is selected, this indicates that all the buttons except the Power button are now disabled. When the Power Lock function is selected, the Power key is disabled. The user cannot turn off the monitor with the Power key. R5911667 /03 AMM215WTTP... -
Page 15: Advanced Operation
Advanced Operation R5911667 /03 AMM215WTTP... -
Page 16: On-Screen Display Menus
1024 x 768 56.48 VESA XGA 1024 x 768 60.02 VESA SXGA 1280 x 1024 64.00 VESA SXGA 1280 x 1024 80.00 VESA SXGA 1152 x 864 67.50 VESA SXGA 1280 x 960 60.00 WXGA+ 1440 x 900 56.00 R5911667 /03 AMM215WTTP... -
Page 17: Touch Screen Driver Installation
4.3 Touch Screen Driver Installation Overview The AMM215WTTP is available with USB connections. The touch driver is located on the enclosed CD-ROM for these operating systems: VISTA, XP, 2000, CE, XP Embedded, Linux, Apple Mac OS. The AMM215WTTP is Microsoft Windows HID (Human Interface Device) compatible if you use the USB touch screen interface. - Page 18 Advanced Operation 2. Be sure the USB cable is connected to the computer 3. Follow the step-by-step instructions found in the folder file on the CD-ROM R5911667 /03 AMM215WTTP...
-
Page 19: Cleaning Your Display
Cleaning your display R5911667 /03 AMM215WTTP... -
Page 20: Cleaning Instructions
CAUTION: To clean the display, do not spray liquid cleaners directly to the screen. Stand away from the monitor, spray the cleaning solution onto a soft cloth and clean gently. CAUTION: Do not use abrasive cleaners, waxes, or solvents. R5911667 /03 AMM215WTTP... -
Page 21: Troubleshooting
Troubleshooting R5911667 /03 AMM215WTTP... -
Page 22: Troubleshooting List
Out of range The signal of the computer graphic card is not compatible with the LCD display. When the signal is not included in the “Modes” listed, the LCD monitor will display this message. “Advanced”, page 16 R5911667 /03 AMM215WTTP... -
Page 23: Important Information
Important Information R5911667 /03 AMM215WTTP... -
Page 24: Safety Information
As unforeseen situations can occasionally occur with the monitor, when the display is used please use a safety control. It is strongly recommended the user uses more than one unit or prepares a spare unit in case there is an emergency. R5911667 /03 AMM215WTTP... -
Page 25: Environmental Information
35 A. 9. To connect to an international power supply, use a an attachment plug appropriate for the power outlet. 10. The AMM215WTTP must be installed and operated according to the EMC information provided in this manual. - Page 26 For more information about recycling of this product, please contact your local city office or your municipal waste disposal service. For details, please visit the Barco website at: http://www.barco.com/AboutBarco/weee Turkey RoHS compliance Türkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.
-
Page 27: Eu Declaration Of Conformity For Medical Applications
A Declaration of Conformity has been filed for this product. A sample of this document may be found in the addendum which accompanies this manual. For a copy of the Declaration of Conformity document, contact Barco, Inc. and request the AMM215WTTP DoC. 7.4 Regulatory compliance information... -
Page 28: Emc Notice
The manufacturing country of the product is indicated on the product label (“Made in …”). Importers contact information To find your local importer, contact one of Barco’s regional offices via the contact information provided on our website (www.barco.com). FCC class B This equipment has been tested and found to comply with the limit for a Class B digital device, pursuant to Part 15 of the FCC Rules. - Page 29 Electromagnetic emissions The AMM215WTTP is intended for use in the electromagnetic environment specified below. The customer or the user of the AMM215WTTP should assure that it is used in such an environment.
- Page 30 0% U ; 1 cycle and 70 % U ; 25/30 cycles input lines environment. If the user of Single phase: at 0° the AMM215WTTP IEC 61000-4-11 0 % U ; 250/300 cycle requires continued operation during power mains interruptions, it is...
- Page 31 If the measured field strength in the location in which the AMM215WTTP is used exceeds the applicable RF compliance level above, the AMM215WTTP should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the AMM215WTTP.
-
Page 32: Explanation Of Symbols
Recommended Separation Distances Between Portable and Mobile RF Communications Equipment and the AMM215WTTP system The AMM215WTTP system is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The user of the AMM215WTTP system can help prevent electromagnetic... - Page 33 Indicates the maximum number of boxes to be stacked on each other. Recyclable Authorized representative in Europe For indoor use only China RoHS symbol. The number indicates EFUP (Environmental Friendly Use Period) from the date of manufacturing R5911667 /03 AMM215WTTP...
-
Page 34: Warranty
BARCO standards, quality and specifications. Subject to the conditions and limitations set forth below, BARCO will, at its option, either repair any component of its products that prove defective by reason of improper workmanship or materials or BARCO has the exclusive right to replace with refurbished units or with an equivalent product. - Page 35 Product End of Life (EOL) In the event of an RMA of an EOL product(s), BARCO will hold or store major components of its products for a period of five (5) years, after the EOL of its products. BARCO shall continue to perform the service of its products as long as BARCO holds or stores said components of the products, with reasonable charge.
-
Page 36: Legal Disclaimer
Barco software products are the property of Barco. They are distributed under copyright by Barco NV or Barco Inc., for use only under the specific terms of a software license agreement between Barco NV or Barco Inc. and the licensee. No other use, duplication, or disclosure of a Barco software product, in any form, is authorized. - Page 38 Barco, Inc. Barco NV President Kennedypark 35 3059 Premiere Parkway, Suite 400 8500 Kortrijk R5911667-03 Duluth, GA 30097 Belgium R5911667 /03 | 2021-04-14 www.barco.com...
Need help?
Do you have a question about the AMM215WTTP and is the answer not in the manual?
Questions and answers