OXY5323A 3.5" SBC User’s Manual V1.1 Safety Information Electrical safety To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
OXY5323A 3.5" SBC User’s Manual V1.1 Revision History Revision Date (yyyy/mm/dd) Changes V1.0 2021/09/08 First release V1.1 2022/02/15 Standard Compliance Packing List Item Description Q’ty OXY5323A Driver CD+ User’s manual If any of the above items is damaged or missing, please contact your local distributor.
OXY5323A 3.5" SBC User’s Manual V1.1 1.2 Specifications System Intel® Apollo Lake-M N3350/N4200 Processor Intel® Apollo Lake-I E3930 Processor Memory type DDR3L 1866MHz,1 x 204pin SO-DIMM, Max. 8GB (Non-ECC) Chipset Intel® SoC Integrated Graphics Intel® HD Graphics Ethernet 2 x Intel® I210-IT Giga LAN Audio Realtek®...
Page 8
OXY5323A 3.5" SBC User’s Manual V1.1 1 x 4-pin CPU Fan Header Power 1 x 8~24V ATX Power Connector, 1 x AT/ATX Mode Select Jumper Others 1 x CMOS Jumper Power Requirement Power Input 8~24V Wide Range DC Input w/4-pin ATX connector (Pitch: 4.2mm)
OXY5323A 3.5" SBC User’s Manual V1.1 Chapter 2 : Jumpers and Connectors 2.1 FRONT_PANEL1 (JLVDS1) LVDS panel pin out define PIN DEFINITION DEFINITION Minus signal of odd Minus signal of odd channel 0 (LVDS) channel 0 (LVDS) Plus signal of odd...
OXY5323A 3.5" SBC User’s Manual V1.1 2.5 SATA SATA PORT0: This is optional port from mini PCI-E and SATA0 Connector Board must also support the following Serial ATA Gen 3 compliant ports One fully-shrouded right angle internal SATA gen 3 ports (colored GREY)
OXY5323A 3.5" SBC User’s Manual V1.1 2.8 USB Front panel USB header pin-out define (FP_USB1) FP_USB1 Pin Signal Signal +5V DC +5V DC Data (negative) Data (negative) Data (positive) Data (positive) Ground Ground Key (no pin) No Connect Rear USB3.0 I/O port (J5/J10)
OXY5323A 3.5" SBC User’s Manual V1.1 2.10 Expansion Slot Layout Slot Configuration Electrical Physical Connector Color M.2 key M socket M.2 Key E socket Black PCI Express 3.0 x1 Mini PCIE Black 2.11 Front Panel Pin out define (JS2) PWR_LED...
OXY5323A 3.5" SBC User’s Manual V1.1 2.12 J_MiAPI_1 Pin out define Signal Name Signal Name MAPI_GPIO1 MAPI_GPIO2 MAPI_GPIO6 MAPI_GPIO3 MAPI_GPIO7 MAPI_GPIO4 MAPI_GPIO8 MAPI_GPIO5 MAPI_GPIO9 Watchdog Timer MAPI_GPIO10 Power Button SMB_MAIN_DATA UART_TX SMB_MAIN_CLK UART_RX 5VSB 2.13 Serial Port J_RS485_P4, J_RS232_P2 Serial port header pin out define...
Page 19
OXY5323A 3.5" SBC User’s Manual V1.1 RS232_P1P3 Serial port header pin out define Signal Signal RS485/RS422/RS232 feature: RS232 RS232 DCD (Data Carrier RXD# (Receive Data) Detect) DTR (Data Terminal TXD# (Transmit Data) Ready) Ground DSR (Data Set Ready) RTS (Request To...
OXY5323A 3.5" SBC User’s Manual V1.1 2.17 Thermal Management and Fan Control Nuvoton NCT6104D Super IO: backup alternate solution as it leverages existing hardware in the designs, but software infrastructure must be put in place to support this solution. Regardless of solution chosen, BIOS/driver/tools support and subsystem validation is required, even if solution is not needed by pilot.
OXY5323A 3.5" SBC User’s Manual V1.1 2.19 Fan Header Requirements The below requirements must be met for the 4-pin processor/heatsink fan (CPU FAN) header: Closed loop fan speed control via the FANPWM0 signal routed to pin-4 Route fan tachometer signal to FANTACH0 input ...
Need help?
Do you have a question about the OXY5323A and is the answer not in the manual?
Questions and answers