Table of Contents
Advertisement
Available languages
Available languages
Note:
- switching on of the repeat modes can be per-
formed from the playback mode, pause or stop
mode.
- to cancel repeat modes, press the (16) REP
button several times, until "REP", "REP ALL" or
"RAND" disappear.
Programming the playback of tracks
You can program playback of tracks (maximum
20) in the desired order.
1.
In the STOP mode, press the (12)
button once, the flashing "PROG" symbol and
"P01" symbol will appear on the display (14).
2.
Press the buttons (11)
sired track.
3.
To store the selected track in memory press
the PROG+10 button, "P02" (14), in which the
next track can be recorded, will appear on the
display (refer to p. 2).
4.
You can program up to 20 tracks, when the
number of the memory cells is exceeded,
"FUL" will appear on the display.
5.
To playback tracks in the programmed order,
press the button (15).
6.
To cancel programmed playback of tracks
press the button (13) , open the lid (2) of the
disc compartment or set the (8) FUNCTION
switch to another position.
Playback of МР3 files from a USB, SD card or
a disc
Qualitative sound, without interferences and mal-
function is guaranteed only at playback of the li-
censed discs, but depending on software of the
manufacturer of the disc or burning speed, problems
while reading the disc by the unit can appear as well.
Playback of files from a USB or SD card
1.
Plug in the unit.
2.
Select the CD playback mode. Set the (8)
FUNCTION switch to the CD position, lighting
of the display (14) will light up.
3.
Inset a USB into the (19) jack or a SD card into
the (20) jack.
4.
After reading of the information from a USB or
SD total number of folders "F", total number of
tracks will appear on the display (14), playback
of the first track from the first folder of the disc
will start. Playback symbols
played, the track number will take turns with
the folder number, format of the track " MP3"
or " WMA" will be displayed in the upper part of
the display.
4002IM.indd 7
4002IM.indd 7
5.
Playback
- In the stop mode press the button (15), playback
from a USB or a SD card will start,
displayed (14), the track number will take turns
with the folder number, format of the track " MP3"
or " WMA" will be displayed in the upper part of the
display.
- In the playback mode to move 10 tracks forward,
PROG+10
press the (12) PROG +10 button.
Pause
/
to select the de-
- To pause the playback press the button (15), the
the display (14).
- To resume playback, press the button (15) once
again.
Stop the playback
- To stop the playback press the button (13) , to-
tal number of the tracks on the disc will appear on
the display (14).
Moving to the beginning of the previous track
or to the next track.
- During the playback or in the pause mode, to
move to the previous or the next track press the
buttons (11)
Moving to the playback of a certain fragment
of a track
- In the playback mode press and hold the buttons
(11)
certain fragment of a track.
Note:
- in the quick moving to the fragment of a track
mode, when one of the buttons (11)
pressed, the sound is not played back.
- with long pressing or holding the (11)
playback will start from the beginning of the track,
in which certain place of the playback of the track
fragment was selected.
Repeated playback of a track or a disc
- To repeat one track press the (16) REP once,
"REP" will appear on the display.
will be dis-
Repeated playback of the album (ALBUM)
To repeat all tracks of the album (one of the fold-
ers "F") press the (16) REP button twice, "ALBUM"
will appear on the display (14).
7
If the damaged USB or SD card is inserted "no"
will appear on the display (14).
and the number of the track will be flashing on
/ .
/
for quick moving to the playback of a
ENGLISH
, will be
/
is
button,
30.05.2011 16:11:36
30.05.2011 16:11:36
Advertisement
Table of Contents
