Specifications - Makita 9902 Instruction Manual

ENGLISH (Original instructions)
1-1. Lock button
1-2. Switch trigger
2-1. Speed adjusting dial
3-1. Lever
5-1. Dust bag
5-2. Dust spout

SPECIFICATIONS

Model
Belt size
Belt speed
Overall length
Net weight
Safety class
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Intended use
The tool is intended for the sanding of large surface of wood,
plastic and metal materials as well as painted surfaces.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode : sanding metal plate
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
6-1. Dust bag
6-2. Fastener
7-1. Optional hose 28 mm in inner
diameter
7-2. Hose of vacuum cleaner
7-3. Vacuum cleaner
noise level determined
) : 85 dB (A)
pA
) : 96 dB (A)
WA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
9902 9903
76 mm x 533 mm 76 mm x 533 mm
440 m/min
296 mm
4.3 kg 4.3 kg
ENE052-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENF002-2
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
ENG905-1
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Belt Sander
Model No./ Type: 9902,9903,9920,9404
Conforms to the following European Directives:
ENG900-1
2006/42/EC
They are manufactured in accordance with the following
sum)
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
ENG901-1
3
9-1. Sanding shoe
10-1. Limit mark
11-1. Brush holder cap
11-2. Screwdriver
9920
76 mm x 610 mm 100 mm x 610 mm
210 - 440 m/min
334 mm
4.5 kg
/II
9404
4.8 kg
ENH101-18