Development Steps - Fujitsu F2MC-16L User Manual

CHAPTER 2 Developing Application Systems
2.6

Development Steps

Table 2.6 lists the steps required to develop an application system for REALOS/907.
Figure 2.6 shows the development procedure for REALOS/907.
I Development steps
Table 2.6 lists the application development steps and the required software.
Development Steps
System design
Select target hardware
Prepare development
environment
Develop and debug
programs
Configure system
Run and debug
application system
Load in ROM
Operation
12
Table 2.6 REALOS/907 Development Steps and Required Software
Design the system. Determine the required
hardware and whether or not to use REALOS/
907 in this step.
Determine the hardware on which the
application system is to run.
New hardware may need to be developed.
Configure the REALOS/907 development
environment on a host computer.
Design and develop the task and handler
programs based on the system design
specifications
Perform independent debugging of tasks and
handlers.
Configure the independently developed task and
handler programs as a REALOS/907 application
program.
Run the resulting REALOS/907 application
system on the target hardware and perform
system debugging.
Load the REALOS/907 application system into
ROM using the ROM loading tools.
Manage and operate the REALOS/907
application system.
Description
*
Software
-
-
-
C compiler, assembler,
linkage kit, simulator
debugger
Configurator, C
compiler, assembler,
linkage kit
Emulator debugger,
Monitor debugger
Communications
program for the ROM
programmer, Object
tool
-