Continuous Drainage - Mitsubishi Electric MJ-E80EX-H Instruction Manual

Table of Contents

Advertisement

Continuous Drainage

If a drain is available, the unit can continuously drain excess water by attaching a commercially available hose
(internal diameter 15 mm).
The unit can be operated for extensive periods without the need to empty the water tank.
Long enough to reach the drain.
Hold the handle and
gently pull out.
Use pincers to cut away the three securing
ribs of the continuous drainage outlet. Remove
carefully without letting any debris fall inside.
(Be careful not to catch your hand on the notch.)
Confirm that the hose does not show signs of deterioration such as bending cracks and clogging.
If it is difficult to insert the hose, wet the hose with water and insert. Do not use oil or lubricant instead of water.
Inspect the hose every 2 weeks. Insects or dirt blocking the hose may cause leakage resulting in malfunctions.
hose immersed in water
hose raised to a level
higher than the drainage
outlet
238 mm
160 mm
Drain
Drain
Stopper
Stopper
Water inside the hose may freeze and water may leak
from the unit and
Foreign objects, etc. could clog the hose
1 Feed the commercially available hose
(ID 15 mm) onto the drainage outlet while
keeping the stopper pressed.
2 Firmly push the
hose through the
drainage outlet of
the unit.
Drain
Hose
3 Check for water leakage.
If the tank is not reattached, the "FULL lamp"
remains on and operation is not possible.
.
.
Hose

Advertisement

Table of Contents
loading

Table of Contents