Advertisement
Assembly:
Connect the upper and lower handle segments by
sliding the upper handle onto the lower handle
piece. The lower handle piece has a bolt hole at the
bottom end (do not slide the upper handle onto this
end). When the handle pieces together are the
desired length, turn the set screw clockwise. Tighten
the set screw so that the upper handle cannot slide
off of the lower piece.
Turn set screw
clockwise and tighten
it against lower
Upper handle
piece with
(yellow) hand
grip
Lower handle piece
with bolt hole in
bottom end
Using the sweeper
To collect magnetic materials, simply grasp the hand grip
and roll the sweeper over the selected area. Move the
sweeper to the desired location and disengage the magnet
by pulling the magnet handle up. To facilitate easy cleanup,
move the sweeper to a collection point before releasing the
magnet. For instance, put a piece of cardboard on the floor,
move the sweeper to the cardboard, and release the
magnet. All of the items can then be quickly picked up and
moved or poured into a container.
Copyright 2017 Vestil Manufacturing Corp.
Rev. 9/26/2017
Handle bracket
MFSR, MANUAL
Carriage
bolt
Attach lower handle piece to handle bracket
with a carriage bolt, flat washer, and wing
nut.
Wing nut
Page 3 of 4
Flat
washer
Pull magnet
handle up to
release collected
items.
Advertisement
