Inserting The Door Panels - GE Profile PSCF3RGX Owner's Manual And Installation

Inserting the door panels.

Read these instructions completely and carefully.
Insert the Freezer Panel and Fresh Food Panel.
Carefully push the freezer panel in until it slides
into the slot behind the door handle. Push the filler
panel (required with some door panels) in behind
the decorator panel. Repeat for fresh food panel.
Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the slot
behind the door handle. Push the filler panel (required
with some door panels) in behind the decorator panel.
Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator
compartment.
With a T-20 Torxdriver, attach the Top Trim, using two
screws on each Top Trim piece, to the top of each
Top Trim Screws
Top Trim Screws
Cutout
Top
Freezer
Panel
Bottom
Freezer
Panel
Side Trim
If your model has a dispenser, this step only
applies to the fresh food panel and top freezer panel.
door. Hand tighten only. Make sure that the top of
each panel fits snugly behind the lip of the Top Trim.
Cutout
Fresh
Food
Panel
Side Trim
21