Inserting The Door Panels - GE Profile PSC23NHS Owner's Manual And Installation Manual

Side by side refrigerators models 23, 25, 26, 27 and 29
Hide thumbs Also See for Profile PSC23NHS:
Table of Contents

Advertisement

Available languages

Available languages

Inserting the door panels.

Read these instructions completely and carefully.
Insert the Freezer Panel and Fresh Food Panel.
Carefully push the freezer panel in until it slides
into the slot behind the door handle. Push the filler
panel (required with some door panels) in behind
the decorator panel. Repeat for fresh food panel.
Insert the Bottom Freezer Panel (on dispenser models).
Carefully push the panel in until it slides into the
slot behind the door handle. Push the filler panel
Attach the Top Trim on the Freezer and Fresh Food Doors.
The Top Trim can be found inside the refrigerator
compartment.
With a T-20 Torxdriver, attach the Top Trim, using
two screws on each Top Trim piece, to the top of
Top Trim Screws
Top Trim Screws
Cut-Out
Top
Freezer
Panel
Bottom
Freezer
Panel
Side Trim
If your model has a dispenser, this step only applies
to the fresh food panel and top freezer panel.
(required with some door panels) in behind the
decorator panel.
each door. Hand tighten only. Make sure that the
top of each panel fits snugly behind the lip of the
Top Trim.
Cut-Out
Fresh
Food
Panel
Side Trim
21

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

Table of Contents