Glass Cooktop - GE JGP337SEJSS Owner's Manual And Installation Instructions

Built-in gas cooktops
Hide thumbs Also See for JGP337SEJSS:
Table of Contents

Advertisement

Cleaning the glass cooktop.
Clean your cooktop after
each spill. Use CERAMA
BRYTE
®
Ceramic Cooktop
Cleaner.
Use a CERAMA BRYTE
®
Cleaning
Pad for Ceramic Cooktops.
The CERAMA BRYTE
®
Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under "To Order
Parts" section on next page.
NOTE: Do not use a dull or
nicked blade.
12
(on some models)
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Before using the cooktop for the
first time, remove the burner grates
and clean it with CERAMA BRYTE
Ceramic Cooktop Cleaner. This
helps protect the top and makes
cleanup easier.
Daily use of CERAMA BRYTE
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
Burned-On Residue
WARNING: DAMAGE to your glass surface
may occur if you use scrub pads other than
those recommended.
Allow the cooktop to cool.
Remove the burner grates and
spread a few drops of CERAMA
®
BRYTE
Ceramic Cooktop Cleaner
on the entire burned residue area.
Using the included CERAMA
BRYTE
®
Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
Use the CERAMA BRYTE
Ceramic Cooktop Scraper at
approximately a 45° angle against
the glass surface and scrape the
soil. It will be necessary to apply
pressure to the razor scraper in
order to remove the residue.
After scraping with the
CERAMA BRYTE
®
Ceramic
Cooktop Scraper, spread a few
drops of CERAMA BRYTE
Ceramic Cooktop Cleaner on the
entire burned residue area. Use the
CERAMA BRYTE
®
Cleaning Pad to
remove any remaining residue.
®
Ceramic
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE
directly to the cooktop.
Use a paper towel or CERAMA
BRYTE
Cooktops to clean the entire
cooktop surface.
®
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
®
heat the cooktop until it has been cleaned
thoroughly.
IMPORTANT: Do not lift the cooktop. Lifting
the cooktop can lead to damage and improper
operation of the cooktop.
If any residue remains, repeat the
steps listed above as needed.
For additional protection, after
all residue has been removed,
polish the entire surface with
CERAMA BRYTE
Cooktop Cleaner and a paper towel.
For additional protection,
after all residue has been
®
removed, polish the entire
surface with CERAMA BRYTE
Ceramic Cooktop Cleaner
and a paper towel.
®
®
Ceramic Cooktop Cleaner
®
Cleaning Pad for Ceramic
®
Ceramic
®

Advertisement

Table of Contents
loading

This manual is also suitable for:

Jgp337

Table of Contents