Scanning With [Start] On The Machine - Canon MF6500 Series Driver Manual

Introduction
1

Scanning with [Start] on the Machine

Scanning a
Document 2
Troubleshooting
3
Appendix
4
Table of Contents
Index
You can scan documents and transmit the scanned data to
your computer using the operation panel of the machine.
NOTE
Your machine must be connected via USB and the USB scanner driver
must be loaded to scan. This machine does not support network
scanning.
1.
Set documents.
2.
Press [SCAN] on the machine.
3.
Press [Start] on the machine.
If you are asked to select a program to launch, select "MF
Toolbox Ver4.9." The scanned document will be processed
according to your settings.
When scanning is completed, a folder with the scanning date will
be created in the [My Pictures] folder in the [My Documents]
folder, and your document will be saved in this folder.
TOP
Back Previous Next
2-4