GE JKP28 Dimensions And Installation Information

GE Appliances
JKP28BF/WF – GE 27" Built-In Double Oven
27" Built-In Double Oven Dimensions (in inches)
Locate
10
junction box
for 27"models
A
either 5" MIN.
below cutout
floor or 44"
MIN. above
cutout floor
C
D
Conduit
E
49" long
2" X 4" or
equiv. runners
Minimum
(cutout floor)
cutout location
from floor
Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of
at least a 194°F temperature rating.
Note: If marks, blemishes or the cutout opening is visible above the installed
oven, it may be necessary to add wood shims under the runners and front trim
until the marks or openings are covered.
Electric wall ovens are not approved for installation with a plug and receptacle.
They must be hard wired in accordance with installation instructions.
Specification Created 7/02
Allow 3/4"
for overlap
over all edges
of cutout
B
G
20
F
20" MIN.
door opening
allowance
C L
Suitable
bracing
to support
18"
runners
Over centerline
of cabinet
(Must support 275 lbs.)
Cabinet
A – Cabinet Width Required
B – Minimum Cabinet Depth
C – Opening Width 25" min. - 25-1/4 max.
D – Opening Height
E – Recommended Minimum
Cutout Location from Floor
Oven
F – Overall Depth
w/o trim
G – Overall Height with trim
H – Overall Width
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram, ® GE Profile
GE appliance questions, visit our website at
GEAppliances.com or call
GE Answer Center ® service, 800.626.2000.
KW Rating
2" x 4" or
equivalent
240V
runners
208V
Breaker Size
240V
208V
27"
27" min.
23-5/8"
50-1/8" max.
13-1/4"
23-5/8"
50-1/4"
51"
26-5/8"
™ or
R
7.1
5.3
30 Amps
30 Amps
Listed by
Underwriters
Laboratories