Document Tray And Eject Tray; Preparing The Document Feed Tray; Preparing The Document Eject Tray - Canon IMAGE FORMULA DR-6010C User Manual

Chapter 3 Basic Operation

3-2 Document Tray and Eject Tray

Prepare the document feed tray and document eject tray according to the paper size and feed/eject
method.

Preparing the Document Feed Tray

1
Grasp the middle of the document feed tray and slowly open it toward you. If the documents
slide off the tray, pull out the document feed tray extension.
CAUTION
Do not place anything other than documents on the document feed tray. Doing so may
damage the scanner, reduce scanning quality, or cause the tray to fall off, resulting in
personal injury or damage to the scanner.

Preparing the Document Eject Tray

The scanner has two eject methods: documents can be ejected to the front of the scanner in a U-
turn path, or to the back of the scanner in a straight path. You can switch between these methods by
opening or closing the document eject tray 2. Select an eject method according to your needs.
Document Flow
Document Feed Tray
Document Feed Tray Extension
U-turn Path Document Eject tray
Document Eject Tray 2
Straight Path
3-3