Warranty Conditions - FlyTek MAXIBAR Operation And Maintenance Manual

PROBLEM
Insufficient or impossible
coffee brewing
Brewed coffees are cold
Pump makes too much
noise and does not allow
coffee brewing
The "cream" is not enough
or missing at all
POSSIBLE CAUSE
Empty water tank
Grinding too fine
Cold ceramic cups
Faulty heating system
The pump sucked in air
Grinding too coarse
Coffee not fresh
Water has been in the tank
for many days
SOLUTION
Fill the tank (page 16).
Use a new pod. Contact
coffee pod Supplier.
Preheat the cups with hot
water or putting them on the
cup warmer. Alternatively,
use disposable cups.
Contact the Supplier.
Fill the tank (page 16) and
repeatedly press the manual
coffee dispensing switch
(switch 2 of the panel ref. C)
until the pump is correctly
triggered.
Use a new pod. Contact
coffee pod Supplier.
Use a new pod. Contact
coffee pod Supplier.
Replace the water in the
tank paying attention that
the probe is resinserted
correctly.
20