Removing The Upper Rack; Silverware Basket - GE CDW9380NSS Owner's Manual

Ge dishwasher owner's manual
Hide thumbs Also See for CDW9380NSS:
Table of Contents

Advertisement

Available languages

Available languages

Shower Nozzle Service
Part Number WD12X10134
Press thumb
Remove end cap
tab out
One-piece basket (on some models)
Three-piece basket (on some models)
Don't let any
item extend
through bottom.
To remove end baskets, grasp the basket
at opposite corners and slide apart.

Removing the Upper Rack

Your new dishwasher has the capability to
wash extra large items in the lower rack. This
is accomplished by removing the upper rack
and installing a nozzle over the port that
normally supplies water to the upper rack.
The nozzle is not included with your
dishwasher, but is available for purchase from
GE. Call GE at 1.800.626.2002 or go to the GE
website ge.com and request Nozzle Spray
Asm, part number WD12X10134.
Customers in Canada can order on-line at
geappliances.ca 24 hours every day, or by
phone at 1.800.661.1616 during normal
business hours.
NOTE: Do not use the SINGLE RACK WASH
cycle (some models) with this feature. Single
Rack Wash cycle is for upper rack wash only.
The recommended cycle for lower rack only
use is the COOKWARE cycle.
NOTE: Nozzle must be in place with upper
rack removed. If not installed properly, poor
wash performance and noise will result.

Silverware Basket

To load flatware, simply push the adjustable
handle to either side (on some models). Put
flatware in the removable basket with fork
and knife handles up to protect your hands.
Place spoons in the basket with handles
down. Mix knives, forks and spoons so they
don't nest together. Distribute evenly. Small
plastic items, such as measuring spoons and
lids from small containers should go in the
bottom of the silverware basket with the
silverware on top.
The one-piece silverware basket (on some
models) can be placed in the front, right side
or back of the lower rack.
To remove the upper rack:
1
Press thumb tab out and remove the
front end caps on each side of the rail.
2
Pull the rack straight out and off the rails.
3
Replace the end caps.
4
Push the rails all the way back into the
dishwasher.
5
Slide the shower nozzle attachment over
the spout.
6
Then fill the lower rack and begin
your cycle.
NOTE: Don't forget to remove the shower
nozzle attachment before you replace the
upper rack.
A variety of options is available regarding
the three-piece silverware basket (on some
models) in your dishwasher. The complete
basket is designed to fit on the right side of
the lower rack. Additionally, each end of
the basket is removable to add loading
flexibility to accommodate flatware and
lower rack capacity needs.
The lids of both end and middle baskets (on
some models) can be closed to contain small
items. Long items can be placed on the utility
shelf in the upper rack.
ge.com
Shower nozzle
attachment
13

Advertisement

Table of Contents
loading

Table of Contents