GE Zoneline AZ58H12DAD Owner's Manual And Installation Instructions page 11

Heat pump model 5800
Hide thumbs Also See for Zoneline AZ58H12DAD:
Table of Contents

Advertisement

Available languages

Available languages

To maintain optimum performance, clean the filters at least every 30 days.
Air Filters
Dirty filter—Needs cleaning
Turn the Zoneline off before cleaning.
The most important thing you can do to
maintain the Zoneline is to clean the filter
at least every 30 days. Clogged filters reduce
cooling, heating and air flow.
Keeping these filters clean will:
s Decrease cost of operation.
s Save energy.
s Prevent clogged heat exchanger coils.
s Reduce the risk of premature component
failure.
To clean the air filters:
s Vacuum off the heavy soil.
s Run water through the filters.
s Dry thoroughly before replacing.
FRONT
Clogged filter—Greatly
reduces cooling, heating
and airflow.
To remove the air filters:
FRONT
Pull up
To replace the air filters:
Push down
CAUTION:
Zoneline without the filters in place. If a filter
becomes torn or damaged it should be replaced
immediately.
Operating without the filters in place or with
damaged filters will allow dirt and dust to reach
the indoor coil and reduce the cooling, heating,
airflow and efficiency of the unit.
Replacement filters are available from your
salesperson, GE dealer, GE Service and Parts
Center or authorized Customer Care
ge.com
2 Air filters
Do not operate the
®
servicers.
11

Advertisement

Table of Contents
loading

Table of Contents