Quick Start Instructions - Canon 4.1 User Manual

Quick Start Instructions

Follow the procedures below to start scanning immediately. If you require more
information at any stage, read the pages referenced at each step.
Install Plug-in Module CS-U
1
1
This step is not required if you have already installed Plug-in
Module CS-U following the instructions in the Quick Start
Guide.
1. Place the CanoScan Setup Utility CD-ROM into the
2. Click [Install the Software] to install Plug-in Module CS-U and
Start Plug-in Module CS-U
2
2
1. Start Adobe Photoshop LE or other plug-in compatible
2. Open the [File] menu, select [Acquire] and [CanonPI CS-U
Position materials for scanning and preview them.
3
3
1. Position an item on the document glass (platen).
2. Click the Preview button.
computer's CD-ROM drive. The CanoScan Setup Utility will
start automatically. (If it doesn't, double click the [CD-ROM]
icon, followed by the [setup] icon.)
the other application programs.
application.
4.1.0...].
p. 16
• The entire scanable area of the document glass will be
previewed and displayed in the preview window.
p. 14
10