Technical Data - Milwaukee M12 ONEFTR38 User Manual

TECHNICAL DATA

Tool reception
No-load speed
Torque (maximum)
Battery voltage
Weight according to EPTA-Procedure 01/2014 (2.0 Ah)
Frequency bands of Bluetooth
Bluetooth version
Recommended ambient operating temperature
Recommended battery types
Recommended charger
Noise/vibration information
Measured values determined according to EN 62841
A-weighted sound pressure level
Uncertainty K
A-weighted sound power level
Uncertainty K
Wear ear protectors!
Total vibration values (vector sum in the three axes) determined according to EN 62841
Vibration emission value a
h
Impact tightening of fasteners of the maximum capacity of the product
Uncertainty K
WARNING!
The vibration and noise emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 62841 and may be used to compare one product with another. It may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission level represent the main applications of the product. However, if the product is used
for diff erent applications, with diff erent accessories or poorly maintained, the vibration and noise emission may diff er. This may
signifi cantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and noise should also take into account the times when the product is turned off
or when it is running but not actually doing the job. This may signifi cantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the eff ects of vibration and/or noise, such as maintaining the
product and the accessories, keeping the hands warm, and organising work patterns.
WARNING! Read all safety warnings, instructions,
illustrations, and specifi cations provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fi re and/or serious injury.
Save all warnings and instructions for future reference.
TORQUE WRENCH SAFETY WARNINGS
WARNING! To reduce the risk of explosions, electric
shock and damage to property and equipment, never
tighten and loosen live bolts and nuts. The product is not
insulated. Contact with live components could result in
severe injury or death.
Power tool gripping surfaces are not insulated, and not
intended for use in an operation where the fastener may
M12 ONEFTR38
3/8" (9.52 mm)
0 – 100 min
13.6 – 136 Nm
12 V
2.48 kg
2402 – 2480 MHz
4.2 BT signal mode
79.99 dB(A)
3 dB(A)
90.99 dB(A)
3 dB(A)
1.59 m/s 2
1.50 m/s
2
contact hidden wiring. Fasteners contacting a "live" wire may
make exposed metal parts of the power tool "live" and could
give the operator an electric shock.
Use only sockets and other accessories specifically
designed for use on wrenches and drivers. Other sockets
and accessories might shatter or break causing injury.
Do not push the product handle to gain leverage. Adjust
your stance and pull on the product handle to prevent a
possible fall while applying torque.
Never use extensions, such as a pipe, on the product
handle. Using extensions could cause damage to the product
or personal injury due to slippage.
Over-torquing can cause damage. Do not flex the head of
the product for leverage. Excessive force on the product
in anyway will cause permanent damage.
13
M12 ONEFTR12
1/2" (12 mm)
0 – 100 min
-1 -1
17 – 203 Nm
12 V
2.48 kg
2402 – 2480 MHz
4.2 BT signal mode
-18°C – +50°C
M12B
C12C, M12-18
82.84 dB(A)
3 dB(A)
93.84 dB(A)
3 dB(A)
3.35 m/s 2
1.50 m/s
2
English 13