Messages - Sony Walkman NW-E403 Operating Instructions Manual

Troubleshooting

Messages

Follow the instructions below if an error message appears in the display.
Message
AVLS (blinks)
CANNOT PLAY
CHARGE ERROR
DATA ACCESS
ERROR
EXPIRED
FILE ERROR
HOLD
LOW BATTERY
46
Meaning
The volume level exceeds the rated
value while the AVLS is enabled.
• Your Network Walkman cannot
play certain files because of
incompatible formats.
• Transferring has been interrupted
forcefully.
The power supply is abnormal.
Accessing the built-in flash
memory.
A malfunction is detected.
The song is playback restricted by
the copyright holder.
• The file cannot be read.
• The file is not normal.
Your Network Walkman cannot be
operated because the Shuttle switch
is set to the HOLD position.
The battery is low.
Remedy
Turn the volume down or disable the
AVLS (page 32).
If the file cannot be played, you can erase
it from the built-in flash memory.
For details, refer to "To delete abnormal
data from the built-in flash memory"
(page 47).
Try using another computer.
Please wait for access to complete. This
message appears while the built-in flash
memory is initiating.
Please consult your nearest Sony dealer.
If song cannot be played, you can erase it
from the built-in flash memory.
For details, refer to "To delete abnormal
data from the built-in flash memory"
(page 47).
Transfer the normal audio file back to the
computer and then format your Network
Walkman. For details, refer to "To delete
abnormal data from the built-in flash
memory" on page 47.
To operate Network Walkman, set the
Shuttle switch to the center (normal)
position (page 30).
You must charge the battery (page 12).