NOTE: See "Homeowner's Guide" for detailed specifications of the bidet seat.
* Power value shall be checked under the following condition: dynamic pressure 0.2Mpa, inlet water temp 15°C.
SIMPLIFIEDDIAGRAMOFTHEUNIT
Auxiliary Panel
Fllush button
Nozzle
* Antibacterial: ring and lid contains long term anti-bacteria silver ions which will inhibit bacteria growth on surface, this does not represent the mildew and other incidental effects.
The antibacterial rate is more than 90% (test per GB21551.1-2008, GB21551.2-2010 antibacterial performance test requirements).
1250881-T01-A
3.8L
305mm
0.07MPa (Dynamic Pressure) - 0.74MPa
220V ~ 50Hz
1100W*
705mm x 451mm x 526mm
About 46kg
1 ℃-40℃
Fast Press (Caution: Hitting the switch forcefully may cause deformation.)
Bumper x 2
Press dryer button to
Seat Cover (Antibacterial*)
activate dryer function
Seat (Antibacterial*)
Seat Sensor Area
40
Light sensing area
Press button to
Press button to
activate rear wash
activate front wash
1.Standby function.
Hold "
"button (over 2s) to enter standby mode.
Details refer to "Standby function" chapter on page 15.
2. Stop function.
Press "
"button to stop flushing, dryer, air
purification, one button sterilization, manual wand
Need help?
Do you have a question about the KARING 2.0 K-77780T-0 and is the answer not in the manual?