Installing the microphone
(XAV-64BT only)
To capture your voice during handsfree calling,
you need to install the microphone (supplied).
For details on how to connect the microphone,
refer to the supplied “Installation/Connections”
guide.
Pairing
Pairing is required only the first time you connect
to a Bluetooth device (cellular phone, etc.).*
1
To pair this unit to a Bluetooth device, you need
to enter the same passkey*
2
on this unit and on
the Bluetooth device. The passkey can be either
your own selected number or the number
determined by the Bluetooth device. For details,
refer to the manual of the Bluetooth device.
*1 If you delete the device registration from this unit
by initializing, you need to perform pairing again.
*2 Passkey may be called “passcode,” “PIN code,”
“PIN number,” “password,” etc., depending on the
Bluetooth device.
1
Select the Bluetooth source.
To select Bluetooth Phone, press (TOP), then
touch “BT Phone” in the top menu.
To select Bluetooth Audio, touch “Source
List,” then “BT Audio.”
2
Touch “BT Menu.”
In the case of Bluetooth Audio, touch “Play
Menu,” then “BT Menu.”
The Bluetooth setting menu appears.
Back
ATT
Top
BT Menu
Signal
OFF /
ON
Pairing
Auto Answer
OFF
1/2
Ringtone
Default
/ Cellular
EC/NC Mode
Mode 1
/ Mode 2
3
Touch “Pairing.”
Pairing starts.*
* If the Bluetooth signal of this unit is off, it
activates automatically when pairing starts.
Page 32