Getting Started; Playable Discs On This Unit; Resetting The Unit; Canceling The Demo Mode - Sony CDX-GT930UI Operating Instructions Manual

Fm/mw/lw compact disc player
Hide thumbs Also See for CDX-GT930UI:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

Getting Started

2

Playable discs on this unit

This unit can play CD-DA (also containing CD
TEXT) and CD-R/CD-RW (MP3/WMA/AAC
files (page 25)).
Type of discs
CD-DA
MP3
WMA
AAC

Resetting the unit

Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel (page 6) and press the
RESET button (page 8) with a pointed object,
such as a ball-point pen.
Note
Pressing the RESET button will erase the clock setting
and some stored contents.

Canceling the DEMO mode

You can cancel the demonstration display which
appears during turning off.
1
Press and hold the multi way encoder.
The setup display appears.
2
Rotate the multi way encoder until
"Demo" appears, then press it.
3
Rotate the multi way encoder to select
"off."
4
Press and hold the multi way encoder.
The setup is complete and the display returns
to normal play/reception mode.
6
Label on the disc
Preparing the card remote
commander
Remove the insulation film.
Tip
For how to replace the battery, see page 26.

Setting the clock

The clock uses a 24-hour digital indication.
1
Press and hold the multi way encoder.
2
Rotate the multi way encoder until
"Clock Adjust" appears, then press it.
The clock adjustment display appears.
3
Rotate the multi way encoder to set
the hour and minute.
To move the digital indication, push the multi
way encoder left/right.
4
After setting the minute, press the
multi way encoder.
The clock starts.
Tip
You can set the clock automatically with the RDS
feature (page 15).

Detaching the front panel

You can detach the front panel of this unit to
prevent theft.
Caution alarm
If you turn the ignition switch to the OFF
position without detaching the front panel, the
caution alarm will sound for a few seconds.
The alarm will only sound if the built-in
amplifier is used.
1
Press (OFF).
The unit is turned off.
2
Press
.
The left side of front panel is released.

Advertisement

Table of Contents
loading

Table of Contents