Advertisement
Quick Links
AppNeta Devices
All devices provided are Bootstrapped, which
means they are automatically connected to a
dedicated Fuze instance on the AppNeta cloud
or portal. You only need to connect the power
and network to the device and confirm from
the LED that the device is online and ready.
Note: You should then contact your Fuze
Network Consultant to activate the device,
which will assign the device into an
organization dedicated to you.
AppNeta Customers Quick Reference Guide
Powering on M35
To start your M35 device:
1. Power on. Appliance is fully booted
when the status LED turns to one of
three ready states
2.
to network. Cable the appliance
Connect
according to the instructions in the next
section. Status LED turns to green
heartbeat when connected
Copyright Fuze, 2018
Powering on M50
To start your M50 device:
1. Power on. Appliance is fully booted
when the status LED turns to one of
three ready states
2. Connect to network. Cable the appliance
according to the instructions in the next
section. Status LED turns to green
heartbeat when connected
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for AppNeta M35
Summary of Contents for AppNeta M35
- Page 1 1. Power on. Appliance is fully booted 1. Power on. Appliance is fully booted dedicated Fuze instance on the AppNeta cloud when the status LED turns to one of when the status LED turns to one of or portal.
- Page 2 If you haven’t received your account details by port on the monitoring point connected to a mirror source port is the one being monitored, way of a welcome email from AppNeta, please switch on your network like other LAN clients. typically the aggregation point.
Need help?
Do you have a question about the M35 and is the answer not in the manual?
Questions and answers