Advertisement
3. It is forbidden to stare at the TX fiber-transfer end with naked eyes.
4. Single optical fiber transceiver must be used in pair.
Trouble shooting
1. Device is not matched. Please select the corresponding network device according to the
transfer rate of the product (10Mbps or 100Mbps) when connected to other network
devices.
2. Line loss is excessive during the fiber wiring. Excessive loss in connector plug-in and fiber
soldering welding, and excessive intermediate nodes may cause excessive loss rate or
abnormal operation.
General
To ensure trouble free transportation and storage, all OT Systems products must be thoroughly
inspected, tested and properly packed before delivery. Check the product upon receipt for any
visible damage which may have been caused during shipment.
EC1111-X-MINI Series / version 1.0
-END-
OT Systems Ltd. | www.ot-systems.com
Quick Installation Guide
Advertisement
