Product Description; Technical Description; Intended Use - Thermo Scientific TSB140R Operating And Maintenance Instructions Manual

Product Description

Technical Description

The refrigerated cabinet covered by this manual
produces cold by means of low-pressure vaporisation
of a liquid refrigerant such as R290 inside a heat
exchanger (evaporator). The vapor thus obtained is
brought back to the liquid state by means of a higher
pressure mechanical compression (via a compressor)
followed by cooling in another heat exchanger
(condenser). The correct, uniform distribution of air
inside the cabinet is guaranteed by one or more fan
motors depending on the model.
The machine is composed of a modular monocoque
coated with different materials and insulated with
polyurethane foam at a density of 43 kg/m³.
The instrumentation is grouped on the front panel.
On some models, the motor compartment where the
condenser unit and electrical wiring can be housed
closes automatically.
Inside, the machine is equipped with brackets suitable
for supporting wire shelves, extractible drawers and
steel baskets.
The doors on all machines are equipped with a closing
device with automatic return and door lock and easily
replaceable magnetic seals for perfect tightness.
Measures were taken during design and construction to
obtain a machine that meets specific safety
requirements such as internal rounded corners,
condensate liquid drainage, no rough surfaces,
fixed guards on moving or potentially dangerous parts
and so on.
The maximum capacity of drawers load on all Thermo
Fisher Scientific models is 30 kg with weight uniformly
distributed.
All models are for indoor use and cannot
be installed outdoors.
Warranty will immediately expire,
if equipment is installed improperly.
Medical Devices -Touch Controller

Intended Use

All the listed models are suitable for storage.
For this reason, we suggest only storing products that
have already been refrigerated or frozen (depending on
the model).
We declare that any use outside of those allowed by the
machine is considered as "improper use" and therefore
the manufacturer declines all responsibility.
Thermo Fisher Scientific refrigerators and freezers
designed for the storage and preservation of human
blood, human body liquids and human body tissues
destined to transfusion, administration and
re-introduction in human body in accordance with the
definition of Attachment IX,
point III, rule 2 of Medical Devices Directive 93/42/EC
and subsequent modification 2007/47/EC.
In accordance with the same directive, medical devices
fall in class IIa.
Hence, Thermo Fisher Scientific devices can store:
• Blood
• Plasma
• Breast milk
Despite the above definition of medical devices, the
same refrigerators are allowed for storage and
preservation of:
- Drugs, vaccines, reagents properly stored, whatever
nature.
- Generic use substances and materials in hospital,
laboratory or pharmaceutical environment,
not flammable nor explosive.
User must take care of allowed storage
Note:
temperature. Since, these units are medical devices,
temperature factory setpoint are adjustable within limits
connected to the intended use and therefore, it is user's
responsibility to store those substances or material
following the manufacturer guidelines.
7 | Product Description