Media Configuration Tool Guide
2. Click the Media Type Detailed Settings button to open the Media Type Detailed Settings
3. Set the Drying Time for the media type to be added.
a. Set the between pages (Drying Time) in Between Pages in Drying Time.
The following settings are available for drying time in Between Pages.
30 sec. 1 min., 3 min., 5
min., 10 min., 30 min., 60
b. Set the between scan drying time from the Between Scans list in Drying Time.
The following settings are available for drying time in Between Scans.
No, 1 sec., 3 sec., 5 sec.,
7 sec., 9 sec.
4. Set the Roll Paper Margin for Safety of the media type to be added.
a. Set the length of the near end margin for the roll paper from the Near End Margin list in
Roll Paper Margin for Safety.
The following settings are available for Near End Margin.
Near End Margin
b. Set the length of the far end margin for the roll paper from the Far End Margin list in Roll
Paper Margin for Safety.
Chapter 4 Adding Media Types
This eliminates the wait time for the ink
The sheet is ejected when the specified
time after printing has elapsed. Increase
the value for this setting with media that
does not dry quickly.
For media that has problems, such as
ink smears on the page or colors that
seem uneven during borderless printing
etc., increase the value for this setting.
For media that has no problem when
printing with a standard size margin.
For media that has a strong tendency to
curl, causing the printhead to scratch